ZLab3d is MORE than just B9!

  By

Bangalore’s ZLab3d was the first in India to offer B9Creator sales and prints, focusing initially on the jewellery industry.

We’ve been busy since, adding printing capabilities from other technologies and providing service to additional sectors.

Contact Us now to know more!

B9Creator 3D Resin, Casting, Rapid RTV Silicone, Extras

  By

f8594f18-0e5a-4f8b-b932-d675cc808bea

Thanks to those who visited us in stall MH MJ015 VII, 5-8 August 2016 at the IIJS show Machinery Section, The Lalit Hotel, Mumbai!

As always, we provide exclusive and expanded offerings for your 3D printing & casting needs. ZLab3d/KNS are pioneers in jewellery industry 3D printing in India.

EXCLUSIVE consumables for casting and mould making:

  • Hybrid NV investment powder additive for casting RPT prints
  • Platinsil 30 clear RTV silicone, extremely flexible for delicate and undercut wax designs
  • Platinsil 30 Rapid Cure (RC) clear RTV silicone, cure in under 2 hours without shrinkage

EXPANDING our line of RPT printing items:

  • all FIVE B9Creations DLP SLA printing resins
  • B9Creations Vat, Sweeper, Build Platform and NEW Calibration Grids
  • PDMS kit for fresh vat printing surface
  • weighing scale for PDMS, resin mixes, finished products, etc
  • large and small UV curing units
  • light tight resin containers to reuse resin and keep it fresh
  • small parts basket
  • small parts washer
  • resin spatula for removing prints, cleaning vat
  • solar turntable for even uv curing or display
  • tweezers for handling small parts

Call Nagesh B, 99-000-44332
to find us at The Lalit Mumbai/IIJS or later to know more

ZLab3d Exclusive, Expanded Offerings

  By

See India’s first source for B9Creator, ZLab3d, in stall C023B, 5-8 February 2016 at the IGJME show in the Bombay Exhibition Centre!

This year we are announcing exclusive and expanded offerings for your 3D printing needs:

EXCLUSIVE consumables for casting and mould making:

ZLab3d IGJME

EXPANDED  selection of 3d printing supplies include:

  • all FIVE B9Creations DLP SLA printing resins
  • B9Creations Vat, Sweeper, Build Platform and NEW Calibration Grids
  • PDMS kit for fresh vat printing surface
  • weighing scale for PDMS, resin mixes, finished products, etc
  • large and small UV curing units
  • light tight resin containers to reuse resin and keep it fresh
  • small parts basket
  • small parts washer
  • resin spatula for removing prints, cleaning vat
  • solar turntable for even uv curing or display
  • tweezers for handling small parts

B9Creator v1.8.3 Software Released

  By

A wealth of improvements and new features released in B9Creator software!

In the announcement, there are links to the B9Creator software download page as well as noting that autoupdate is also possible.

Follow the discussion of fellow users in a B9Creator 1.8.3 update Topic as well.

In the General > Official News and Updates forum, Mike J writes:

Some of the updates:

-Improved depth of cure control during the print process. (helps minimize “z bleed”)
-Added floater removal feature to print process (un-supported pixels are not cured, so they don’t mess up the resin)
-Added “Easy Peel” foundation shape.
-In Layout, allowed Models to be pushed below the build table if desired-Added “Snap To Foundation” feature for more control
-Added Yellow and Emerald Material Settings.
-Added “Solidify Scan” feature to layout (for taking certain scans and turning them into solids)
-Added ability to add multiple models to layout at a time.
-Updated Layout view to allow for zooming out further.
-Added ability to associate .stl file with the windows installer/app.
-Added simple measuring tool to layout support mode.
-Fixed issues with linux installer not including some of the correct packages.
-Fixed not being able to select mirrored models in layout.
-Saving job files now defaults to the file name found in the “Job name” field in the slicer plus appends the resolution.
-Fixed firmware bug that left projector turned on in some lost comm situations.
-Fixed firmware bug which could reset lamp hours to zero inadvertently.

B9Creations Emerald and Yellow Resins in India

  By

Just announced by Mike Joyce of B9Creations, these two new additions to the growing B9Creator resins family are especially good for casting, with reduced ash, faster printing times, and for those not casting, two cool new colors!

Mike writes in the Materials Forum:
B9R-3-Emerald
– For use at all B9Creator XY resolution configurations and machine versions.
– Designed to be sliced between 30 and 70 microns Z. Perfect for high details on small or large items.
– Pigmented with green nano particles making it easy to visually verify surface details of the print.
– Nano particle pigments stay suspended in the resin, virtually eliminating the “settling” issues experience with Red & Cherry.
– ~85% less burnout residue (ash) compared to our already low ash Cherry!
– Reduced exposure time (vs Cherry) yields ~12% faster prints on the B9Creator.

B9R-4-Yellow
– For use at all B9Creator XY resolution configurations and machine versions.
– Designed to be sliced between 20 and 40 microns Z. Perfect for capturing extreme detail on your smallest items.
– Yellow pigment stays suspended in the resin, completely eliminating the “settling” issues experience with Red & Cherry.
– The translucent color can make it difficult to see the sharp details, but results in 100% less burnout residue (ash) compared to our already low ash Cherry!
– Reduced exposure time (vs Cherry) yields ~12% faster prints on the B9Creator.

Be the first in India to try these new resins! Contact us

See results from other users in the “New Resins” Topic in the B9Creator Forum.

Now or when you take delivery of the new resins, download the configuration update for your free B9Creator software, so your printer will be ready with a preset for these materials. printer settings for B9Creator Emerald and Yellow.